Nozzle & SpoolWhich printer to buy, what it'll really cost, and what to avoid.

QIDI Plus5

Published · Researched 2026-09-20

Research file — observation date 2026-09-20 unless stated otherwise. Currency is USD unless stated.

Overview

The QIDI Plus5 is a large-format enclosed CoreXY FDM 3D printer made by QIDI (Shenzhen-based), launched ~August 2026 (mid-year launch, ~45 days before observation) as the successor to the QIDI Plus4 (already in this corpus). It keeps the Plus4's cabinet and footprint while upgrading nearly everything inside: 18% more build volume (320×320×300 mm), 65 °C active chamber heating (550W, 3rd-gen), 370 °C nozzle, nozzle-contact loadcell leveling, AI camera, and 3-stage filtration.

The Plus5 is QIDI's play to reset expectations in the sub-$750 large-format class: engineering-grade features (actively heated chamber, 370 °C hotend, linear X rails, 9 mm 1.5GT belts) at a consumer price. It runs native Klipper (Fluidd interface) and supports the QIDI Box multi-color unit (up to 16 colors with 4 units chained).

Key specs

Spec Value Source
Motion system CoreXY, enclosed; X-axis high-precision linear rails; 9 mm 1.5GT belt; Z dual independent lead screws on 10 mm linear shafts QIDI official (us/eu.qidi3d.com); nikktech review
Build volume 320 × 320 × 300 mm QIDI official; All3DP; 3dprinting.com
Max speed 600 mm/s QIDI official; All3DP
Max acceleration 20,000 mm/s² QIDI EU official
Max flow 40 mm³/s (FAQ limits PLA/ABS to ~30 mm³/s) All3DP
Max nozzle temp 370 °C (bimetal nozzle; 0.4 standard, 0.2/0.6/0.8 optional) QIDI official; nikktech
Max bed temp 120 °C (aluminum-silicone heated bed, dual-sided textured PEI) QIDI EU official; nikktech
Active chamber 65 °C, 3rd-gen, 550W (37.5% more heating power than Plus4) 3dprinting.com; QIDI official
Auto-leveling Nozzle-contact loadcell sensor (zero-offset) QIDI official; gizchina
Camera AI camera, failure detection (1080p native per nikktech; 640×480 default stream) QIDI official; nikktech
Filtration 3-in-1: G3 pre-filter + H12 HEPA + coconut-shell activated carbon (99.5% particle capture claimed) QIDI official; gizchina
Firmware Native Klipper (Fluidd); QIDI Studio / OrcaSlicer / PrusaSlicer compatible 3dradicalprints AU
Multi-material QIDI Box compatible (up to 16 colors, 4 units chained); Box also dries filament up to 65 °C QIDI official; All3DP
Connectivity 2.4/5 GHz Wi-Fi, Ethernet, USB; 32 GB eMMC; 4-inch 800×480 touchscreen QIDI official
Power 150W system + 550W chamber + 500W bed (steady-state: 190W PLA, 500W ABS at 25 °C ambient) QIDI US official
Dimensions/weight 500×488×558 mm; 29 kg net QIDI EU official
Filament compatibility PLA, ABS, ASA, PETG, TPU, PA, PC, PPS-CF, carbon/glass-fiber composites QIDI EU official; 3dradicalprints

Pricing

Price Variant Source Observation date
$749.00 Plus5 standalone — QIDI official US store us.qidi3d.com variant list crawled ~2 days before 2026-09-20
$899.00 Plus5 Combo (with QIDI Box) — QIDI official US store us.qidi3d.com same crawl
$849 / $999 Plus5 / Plus5 Combo Polar Cooler bundle — QIDI official US store us.qidi3d.com same crawl
< $700 Plus5 — launch-period member discount gizchina launch coverage Aug 2026 (historical)

What's included / what's needed

In the box: printer, dual-sided textured PEI plate, spool holder, sample filament, tool set, manual. (QIDI standard box; exact Plus5 line items not individually verified — UNVERIFIED.)

Combo add-ons: QIDI Box multi-color/drying unit.

Polar Cooler bundle: active extruder-cooling accessory (sold separately otherwise).

What's needed separately: at least one 1 kg filament spool; QIDI Box for multi-color (sold separately).

Support reality

  • Warranty: QIDI typically offers 1-year limited warranty — exact Plus5 warranty text not fetched this session; UNVERIFIED.
  • Parts: first-party parts from QIDI's store; the Plus4 shares the cabinet, which may help parts commonality.
  • Support reputation: QIDI support is ticket-based with fair-to-good community reviews; the brand has grown significantly since the X-Max/X-Plus lines. The Plus5 is very new (Aug 2026) — long-term reliability data doesn't exist yet.
  • Plus4 relationship: the Plus4 remains the cheaper sibling; the Plus5 is the current flagship of the Plus line.

Community verdict

Launch coverage (All3DP, 3dprinting.com, nikktech, briefglance) is strongly positive on the spec sheet: 65 °C active chamber, 370 °C nozzle, nozzle-contact leveling, native Klipper, and 320³ volume at $749 is an aggressive package — arguably the best engineering-filament value in the prosumer class. The open questions are all about execution: it's a brand-new machine (Aug 2026), so real-world reliability, QIDI Box maturity, and support responsiveness are unproven. Early-adopter risk applies.

Facebook/Reddit: no dedicated social-pass run this session — coverage gap. (QIDI owner groups are active; follow-up pass recommended.)

Sources consulted

  • QIDI official US store (us.qidi3d.com/products/plus5) — full spec table, $749/$899/$849/$999 variant pricing.
  • QIDI official EU store (eu.qidi3d.com/products/plus5) — technical specifications table.
  • All3DP, "Qidi's New Plus5 Brings an 18% Bigger Bed for $749" — launch coverage.
  • 3dprinting.com, "QIDI Plus5 Launch: Large Format 3D Printing Under $750" — launch details.
  • nikktech.com, "QIDI Plus5 3D Printer Review" — detailed spec review.
  • gizchina.com — launch coverage, < $700 member pricing.
  • briefglance.com — analysis piece.
  • 3dradicalprints.com.au — AU dealer spec summary.

Image notes

Three images in the bundled image library/:

  • qidi-plus5-01.jpg (540×540) — from us.qidi3d.com official CDN — official product shot.
  • qidi-plus5-02.jpg (735×735) — from cvetmir3d.ru (Plus 5 Combo listing) — retailer product shot.
  • qidi-plus5-03.jpg (735×735) — from cvetmir3d.ru (Plus 5 listing) — retailer product shot.

Deepening pass (2026-09-20)

Social-source attempts this pass

  • Facebook CLI group-post searches ("Plus5" in 3D Printing / 3D Printing World): 0 results; CLI limitation, not evidence of absence.
  • Threads search "3D printer Plus5" via background script: one result, a promotional QIDI Box video by The Aluminum Carpenter (Sept 20, 2026) — marketing, not owner evidence.
  • YouTube owner/reviewer coverage (below) is the first real owner signal — machine is ~45 days old, so treat everything as early-adopter data.

Price re-verification (2026-09-20)

  • QIDI official product page (crawled Sep 2026): Plus5 positioned "at the $700 range" — consistent with the original session's $749 standalone / $899 Combo. No new discounts found. QIDI FAQ confirms 2.4/5 GHz Wi-Fi, Ethernet, LAN and USB offline printing, QIDI Studio recommended but OrcaSlicer/PrusaSlicer compatible (native Klipper). https://qidi3d.com/products/plus5

New evidence: first week-long hands-on + QIDI Box torture test (YouTube, Aug 2026)

  • Live Q&A video "QIDI PLUS 5 LIVE Q&A — Q2 vs PLUS 5 vs MAX4" (Aug 2026, crawled Sep 2026): reviewer spent a full week testing the Plus5 as a complete system — printer, QIDI Box, QIDI Maker software, filament profiles, calibration, firmware behavior, day-to-day workflow — plus a MAX Torture Benchy run against the Q2 and MAX4. Explicitly promises coverage of "problems and software issues I've encountered... Some good. Some frustrating." Specifics were not extracted from the video audio this session (UNVERIFIED detail), but its existence confirms independent hands-on validation with QIDI Box multicolor + software-ecosystem testing in progress. https://www.youtube.com/watch?v=QKzi8WyC8LY

New evidence: "Not Flashy, Just REALLY Good" review (YouTube, Sep 2026)

  • Reviewer (crawled Sep 2026): "a large-format production workhorse that consistently delivers quality prints with very little fuss or babysitting... incredibly hard to fault" on reliability; caveat — "multicolor isn't its strongest feature." Early but notable: reliability praise matches QIDI's trajectory, while QIDI Box multicolor maturity remains the open question. https://www.youtube.com/watch?v=OuM_Gv8cGq8

New evidence: German long-form test (YouTube, Aug 2026)

  • XrControl deep-dive (German, ~85 min, Aug 2026): covers device teardown-adjacent detail, noise levels ("Lautstärke" segment), 370 °C nozzle, 60–120 °C bed tests, power draw measurements, filament tear tests — with a "Maschine kaputt" (machine broken) segment at ~01:21. The broken-machine segment's cause was not extracted (UNVERIFIED detail); flagging as an early-unit failure worth tracking, not a verdict. https://www.youtube.com/watch?v=VNgyrU0bWBs

Plus4 SSR lesson — check it applies

  • The Plus4's early-unit SSR board failures (melting SSR on 120V units, fixed via revised board + firmware duty-cycle cap) are the closest historical analog; the Plus5 has a 3rd-gen 550W chamber heater. No Plus5 SSR complaints found in 45 days of coverage — absence of evidence, not evidence of absence. Watch owner groups.

Open questions carried forward

  • Real-world reliability beyond 45 days (UNVERIFIED).
  • QIDI Box standalone price/availability; QIDI Box multicolor maturity (first reviewer flags it as the weakest area).
  • Early-unit failure rate (one German reviewer's unit broke during testing — UNVERIFIED cause).
  • Social/community sentiment pass (FB groups, Reddit) — still a gap.

Open questions / UNVERIFIED

  1. Exact box contents.
  2. Exact warranty text and return window.
  3. QIDI Box standalone price and availability.
  4. Real-world reliability (machine launched ~Aug 2026 — too new for long-term data).
  5. The 99.5% particle-capture filtration claim — manufacturer-sourced, needs independent verification.
  6. Social/community sentiment pass (Facebook groups, Reddit, YouTube) not yet run.

Deepening pass 3 (2026-09-21)

facebook-cli status: groups posts --group-id ... --query "..." re-tested 2026-09-21 — still returns [] (endpoint remains broken). groups search surfaced no dedicated QIDI Plus5 owner group — the machine is too new for its own community; coverage remains launch/review-driven, Tier 3 by nature. No long-term (6+ month) owners can exist yet (~60 days post-launch).

New substantive reviews — evidence strength: Tier 3 → Tier 2/3

  • Tom's Hardware (Aug 12, 2026): "goes toe-to-toe with Bambu Lab's H2 series for nearly half the price." Notes TARDIS-like packaging: 18% more build volume than the Plus4 in a smaller footprint. (technewstube syndication of Tom's Hardware review)
  • GamingTrend review (~Aug 2026): "zero failed prints, clogs, jams, calibration drift, or anything else" in testing (single bad orientation admitted as user error); calls consistency "remarkable." Details the QIDI Box: up to 16 colors, filament tangle detection, clog detection, auto-refill, run-out recovery. Three-layer filtration: G3 pre-filter, H12 HEPA, activated carbon ("99.5%" claim — manufacturer-sourced, UNVERIFIED). Flame-retardant chamber. 1080p AI camera (anomaly/spaghetti/foreign-object detection, timelapse). Multi-sensor monitoring: chamber, hotend, bed, motherboard, exhaust flow.
  • YouTube — "QIDI Plus5 Review: Not Flashy, Just REALLY Good" (~Sept 2026): large-format production workhorse, quality prints with little babysitting; flags multicolor as the weakest feature — consistent with the pass-2 ledger's "multicolor weakest" shadow.
  • Week-long torture test (YouTube, ~Aug 2026): LIVE Q&A with Q2 vs PLUS 5 vs MAX4 torture Benchy; tested printer + QIDI Box + QIDI Maker + firmware + workflow. Promised "problems and software issues encountered / fixes and workarounds found" — specifics NOT extracted from video; treat as UNVERIFIED. This is the "week-long torture test findings not extracted" ledger item — still open.
  • SHU76 Italian review (~Aug 2026): ran power-consumption and thermal-imaging bed-uniformity tests; numbers not extracted (UNVERIFIED), but confirms independent thermal testing exists.
  • German review (~Aug 2026) includes an 85-min test with a "Maschine kaputt" segment — cause/resolution still UNVERIFIED (ledger item persists).

Running-cost / ownership signals

  • Reviewer consensus so far: no chronic failure modes reported in the ~60-day window; QIDI's SSR-board response on the Plus4 remains the main credibility signal. QIDI Box pricing/maturity still UNVERIFIED.

Sources added

qidi plus5 — photo 01
qidi plus5 — photo 02
qidi plus5 — photo 03

Sources